Since 1992, we have been working together with the German company ADE WERK, which was the first to adapt electromechanical rams for waterway applications.
Consequently, the first rams were installed in Germany, and since then more than 150 structures in Europe have been equipped with a total of 1400 rams.
To open and close lock gates
To operate bridges
To control dams
To be weather-resistant for 30 years
To permit minimum annual maintenance in addition to ten-yearly maintenance operations
To equip large-scale installations and Freyssinet lock gates
To avoid oil emissions and to operate silently within a context of sustainable development
To permit energy savings
Rams for mitre gates with force 20 KN and stroke 1200 mm
Filling or drain valve actuators with force 55KN and stroke 430 mm
Bypass valve-type rams with force 55 KN and stroke 1230 mm
Half-bridge lifting rams with force 550 KN and stroke 1200 mm
For more technical information on our rams for waterway applications.
Français
Anglais
