Français
Anglais
AFT extruded with the belt - PU 385- 1,5 Coatings
Polyurethane
Accueil | Belts, Pulleys, Accessories | Accessories | Coatings |
AFT extruded with the belt - PU 385- 1,5
AFT extruded with the belt - PU 385- 1,5
Polyurethane
Write your review
Polyurethane extruded directly on the back of the belt which gives it a very good resistance to tearing and perfect connection to the weld.
Coatings
- Color
- Translucent
- Low temperature of use
- -20 °C
- High temperature of use
- 80 °C
- Tolerances (belt + unground coating)
- +/-0,4 mm
- Minimum pulley diameters
- 60 mm
- Thickness
- 1,5 (Profil T5 and AT5) mm
- Product range
- Polyurethane
- Range of coatings
- Polyurethane
- Properties
- Resistant to simple oils, greases, petrol/gasoline and ozone.
- Machining possibilities
- Edges: ground and milled. Surface : ground
- Hardness Nine ShA
- 85 ShA
- Tolerances (belt + ground coating)
- +/-0,1 mm
- Product to be conveyed
- Steel, Sheet metal, Glass, Wood
- Type of part
- Oily
- Ambient environment
- Sharp, Heavy
